![MikeTech41](/img/default-banner.jpg)
- Видео 30
- Просмотров 189 428
MikeTech41
США
Добавлен 23 фев 2013
This RUclips channel is about micro manufacturing and teaching how to become a inventor and Teaching you how to make stuff that you can use to turn in to a business And doing unboxing reviews about tools a crit ment and other technology every once and a while
Third Hand tool - The best or the worst ?
unboxing and overview of the NEWACALOX N-4AR-RD2-us Helping Hand tool Soldering Station
This RUclips channel is about micro manufacturing and teaching how to become a inventor and Teaching you how to make stuff that you can use to turn in to a business And doing unboxing reviews about tools a crit ment and other technology every once and a while
visit my website: www.miketech41.com/
follow us at miketech41
follow us at miketech41/?modal=admin_todo_tour
follow us at miketech41
This RUclips channel is about micro manufacturing and teaching how to become a inventor and Teaching you how to make stuff that you can use to turn in to a business And doing unboxing reviews about tools a crit ment and other technology every once and a while
visit my website: www.miketech41.com/
follow us at miketech41
follow us at miketech41/?modal=admin_todo_tour
follow us at miketech41
Просмотров: 176
Видео
Programming ardrino with graphical/visual programming software called xod
Просмотров 1492 года назад
This RUclips channel is about micro manufacturing and teaching how to become a inventor and Teaching you how to make stuff that you can use to turn in to a business And doing unboxing reviews about tools a crit ment and other technology every once and a while visit my website: www.miketech41.com/ follow us at miketech41 follow us at miketech41/?modal=admin_todo_tour ...
how to create a profile based on face or faces in FreeCAD path 0.18
Просмотров 1,1 тыс.3 года назад
This RUclips channel is about micro manufacturing and teaching how to become a inventor and Teaching you how to make stuff that you can use to turn in to a business And doing unboxing reviews about tools a crit ment and other technology every once and a while visit my website: www.miketech41.com/ follow us at miketech41 follow us at miketech41/?modal=admin_todo_tour ...
how to upgrade your thin and light laptop computer hardware and fine parts
Просмотров 3523 года назад
This RUclips video is about how to upgrade your thin and light laptop computer hardware and fine Parts And some of the problems that you might encounter along the way This RUclips channel is about micro manufacturing and teaching how to become a inventor and Teaching you how to make stuff that you can use to turn in to a business And doing unboxing reviews about tools a crit ment and other tech...
How to create a job in FreeCAD path 0.18
Просмотров 1,8 тыс.3 года назад
This RUclips channel is about micro manufacturing and teaching how to become a inventor and Teaching you how to make stuff that you can use to turn in to a business And doing unboxing reviews about tools a crit ment and other technology every once and a while visit my website: www.miketech41.com/ follow us at miketech41 follow us at miketech41/?modal=admin_todo_tour ...
how to make a contour path in freecad 0.18 path
Просмотров 1,5 тыс.3 года назад
This RUclips channel is about micro manufacturing and teaching how to become a inventor and Teaching you how to make stuff that you can use to turn in to a business And doing unboxing reviews about tools a crit ment and other technology every once and a while visit my website: www.miketech41.com/ follow us at miketech41 follow us at miketech41/?modal=admin_todo_tour ...
how to input tool in to freecad path tool manager
Просмотров 4,8 тыс.3 года назад
how to input tool in to freecad path tool manager This RUclips channel is about micro manufacturing and teaching how to become a inventor and Teaching you how to make stuff that you can use to turn in to a business And doing unboxing reviews about tools a crit ment and other technology every once and a while visit My eBayStore : www.ebay.com/usr/lattmich visit my website: www.miketech41.com/ fo...
DIY 3D printed led camera lights and studio lights
Просмотров 2044 года назад
This RUclips channel is about micro manufacturing and teaching how to become a inventor and Teaching you how to make stuff that you can use to turn in to a business And doing unboxing reviews about tools a crit ment and other technology every once and a while visit my website: www.miketech41.com/ follow us at miketech41 follow us at miketech41/?modal=admin_todo_tour ...
Lenovo ThinkPad L390 Yoga unboxing and overview
Просмотров 2,1 тыс.4 года назад
Lenovo ThinkPad L390 Yoga unboxing and overview This RUclips channel is about micro manufacturing and teaching how to become a inventor and Teaching you how to make stuff that you can use to turn in to a business And doing unboxing reviews about tools a crit ment and other technology every once and a while visit my website: www.miketech41.com/ follow us at miketech41 follow us at...
The Best Free CNC Cam Software FreeCAD path better then fusion 360 Cam
Просмотров 74 тыс.4 года назад
Free Cam Software FreeCAD path better then fusion 360 Cam ?????? This RUclips channel is about micro manufacturing and teaching how to become a inventor and Teaching you how to make stuff that you can use to turn in to a business And doing unboxing reviews about tools a crit ment and other technology every once and a while visit My eBayStore : www.ebay.com/usr/lattmich visit my website: www.mik...
How to import or Editing STL files in FreeCAD for path
Просмотров 16 тыс.4 года назад
This RUclips channel is about micro manufacturing and teaching how to become a inventor and Teaching you how to make stuff that you can use to turn in to a business And doing unboxing reviews about tools a crit ment and other technology every once and a while visit my website: www.miketech41.com/ follow us at miketech41 follow us at miketech41/?modal=admin_todo_tour ...
How to backup profiles in uccnc
Просмотров 5224 года назад
Hi this is MikeTech41 and this channel is abut science technology how-to tutorial diy science education and review and unboxing visit my website: www.miketech41.com/ follow us at miketech41 follow us at miketech41/?modal=admin_todo_tour follow us at miketech41
How to import xml file form mach3 to uccnc
Просмотров 1 тыс.4 года назад
This RUclips channel is about micro manufacturing and teaching how to become a inventor and Teaching you how to make stuff that you can use to turn in to a business And doing unboxing reviews about tools a crit ment and other technology every once and a while visit my website: www.miketech41.com/ follow us at miketech41 follow us at miketech41/?modal=admin_todo_tour ...
How to flash the KuWFi WG3526-4G router firmware
Просмотров 9 тыс.4 года назад
Hi this is MikeTech41 this video shows you how to flash your KuWFi WG3526-4G router firmware More info at: www.miketech41.com/post/design-a-beautiful-blog visit my website: www.miketech41.com/ follow us at miketech41 follow us at miketech41/?modal=admin_todo_tour firmware: www.ofmodemsandmen.com/ firmware: openwrt.org/toh/hwdata/zbt/zbt_wg3526_16m
How to have multiple profiles and save profiles in uccnc
Просмотров 1,3 тыс.4 года назад
Hi this is MikeTech41 and this channel is abut science technology how-to tutorial diy science education and review and unboxing visit my website: www.miketech41.com/ follow me at miketech41 follow me at miketech41/?modal=admin_todo_tour
The overview of MACH3V2.1-L 4-axls Breakout Board CNC Controller
Просмотров 8 тыс.4 года назад
The overview of MACH3V2.1-L 4-axls Breakout Board CNC Controller
review of WG3526-4G KuWFi 4G LTE 802.11AC 1200Mbps Dual Band 2.4-5.0GHz Wireless WiFi Router
Просмотров 9 тыс.5 лет назад
review of WG3526-4G KuWFi 4G LTE 802.11AC 1200Mbps Dual Band 2.4-5.0GHz Wireless WiFi Router
Unboxing and overview UNI-T UT216D Digital Clamp Meters 600A True RMS AC/DC Current Measurement
Просмотров 13 тыс.7 лет назад
Unboxing and overview UNI-T UT216D Digital Clamp Meters 600A True RMS AC/DC Current Measurement
Unboxing and overview of ev-peak CD1 battery charger
Просмотров 1,2 тыс.7 лет назад
Unboxing and overview of ev-peak CD1 battery charger
review of mixshop mix G1 3D printer Kit
Просмотров 1,7 тыс.10 лет назад
review of mixshop mix G1 3D printer Kit
unboxing the mixshop mix G1 3D printer Kit Part-3
Просмотров 21010 лет назад
unboxing the mixshop mix G1 3D printer Kit Part-3
unboxing the mixshop mix G1 3D printer Kit Part-2
Просмотров 16510 лет назад
unboxing the mixshop mix G1 3D printer Kit Part-2
unboxing the mixshop mix G1 3D printer Kit Part-1
Просмотров 27010 лет назад
unboxing the mixshop mix G1 3D printer Kit Part-1
review of Sony ICD-AX412 Voice Recorder
Просмотров 9 тыс.10 лет назад
review of Sony ICD-AX412 Voice Recorder
unboxing of Sony ICD-AX412 Digital Voice Recorder
Просмотров 1,6 тыс.10 лет назад
unboxing of Sony ICD-AX412 Digital Voice Recorder
review of JVC Picsio GC-WP10 Waterproof
Просмотров 2,7 тыс.10 лет назад
review of JVC Picsio GC-WP10 Waterproof
unboxing of the JVC Picsio GC-WP10 Waterproof Pocket Video Camera
Просмотров 62211 лет назад
unboxing of the JVC Picsio GC-WP10 Waterproof Pocket Video Camera
review of Atten 898D rework and soldering station
Просмотров 26 тыс.11 лет назад
review of Atten 898D rework and soldering station
unboxing of Atten 898D rework and soldering station
Просмотров 65511 лет назад
unboxing of Atten 898D rework and soldering station
hey thank you so much for the videos but i had a question what 3D modeling software do you prefer ? something free.. im trying to learn CNC MILL machining because im planning to buy one in a year or two
Spent a couple of hours looking for this info. Finally found it. Nice simple explination. Thanks
is it possible to install linear encoder/glass scales on these breakout boards?
Thank you for making this video. I appreciate the info and the pace of the video. It was easy to follow along :)
Dude get rid of AT&T its garbage
I have a question regarding stock size and origin. What is the reference point for the start depth and finish depth? Say we put 0 as the start depth, is this with respect to the origin point? So in a face milling operation, when the origin is top of the stock edge, what would I put the depth to be milled as?
How do you control the pwm off the spindle ?
Thanks for the video!
Greatly explained, but please make a video without background music and ear ripping clicking noise next time xD
Yea the origin in FreeCad needs to be set to the top of the object and then you can avoid having to do that "negative number" trick that you're using. The toolpath you created thinks that your cutting tool is starting at the bed of the CNC, but you zeroed your CNC tool at the top of the stock. It's a little confusing at first but when you go to cut something everything becomes more clear. Good video though, and super helpful!
wish the volume on the muzac was lower really ruins the vid
thank you very much for this content. Simply explained as easy to follow. I needed this info. Thanks again
Terlalu banyak ngomong, dan laptop tidak di nyalakan 👎
you need to get two yagi directional antennas then your speeds will increase
WHAT'S WITH THE BACKGROUND NOISE????????
Lmao better then fusion cam you obviously havent used fusions cam it is also free and eons ahead of this. Really cool though hopefully one day they can catch up
does this support UCCNC software
I really don’t think so. Mach3 and Linuxcnc should be the only two it supports.
Thank you! This was super helpful!
old delete ty
"Refine Shape" does not appear in the Part dropdown in the 0.20.2 version. Anyone know where it went? UPDATE: It's under the "Create a copy" dropdown within Part.
Lifesaver. Thanks!
thanks really helpful.
Great video! I agree.
Very good tutorial! Hope to see more in the future. 😊
Can You please make a video guide how to connect all wires to this controller? I can't find how to connect En signal :(
Hay, Thanks for your videos Can you make one that shows you where to get tool files for free cad. I think that would help us newbies Ty
Hal yang sama juga terjadi dengan saya, mencoba berbagai software, yang cocok sesuai kebutuham saya. Mesin saya diy CNC GRBL, 2040 vslot, with dc775 300watt. Setelah lancar dengan yang kecil, baru mai mengaplikasikan untuk OX CNC yang besar. Terimakasih telah berbagi pengalaman 🙏👍👍👍
The music is too loud...
“If you have an STL file, guess what! I have a video for that!” I just came from that awesome video.
Can you make a video about creating 3d milling toolpath?
Nice, there are basically no tutorial like this
0:51 Can`t find the command in freecad version 0.20.1
Great video. Are there new functions in freecad 0.20 for path workbench?
hello I have same model zbtlink WG3526 -4G but when I insert sim card lights not indicate only PWR and SYS lights, and SSID is not showing in my computer wifi network list.( I am using I Mac } please help me to correct this issue thank you
ᵖʳᵒᵐᵒˢᵐ 😋
Thank you for a solution that i was struggling with. There are many other vids on RUclips showing how to convert Stl files, but yours gave the solution on the problem of no file to select in the Path part.
Sometimes PWM is done on the ground side. "ground chopping". There seems to be less problems from my experience when you chop ground versus chopping power. The controller your using tends to reset everytime it receives a pulse when power chopping. This is a very common method of speed controlling a fan. Speed controlling a motor is not much difference.
A cosa serve il potenziometro?
Hi there, thanks for the video. I have created a path profile operation and I have a problem. The profile is basicly a circle, but when I read the g-code there is this "K" coordinate, I think it is Z offset. The thing is LinuxCNC doesn't like that "K". It can't run the program with it. I removed it manually from the code and it works perfectly. The question is: Is there a setting in FreeCAD so that this "K" doesn't appear in the G-Code? Thanks a lot !
What is the blue trim pot for ?
For calibration of 0-10 volt output to the vfd.
Extremly Very super sir...i need this circuit drawing please.kindly send that sir
Can you not create a part from scratch? You have to import a design first?
its actually the reception you are getting looking at the bars you were getting on your phone you not getting much so with this router i advise you get out door antennas not wifi antennas but directional 4g antennas and place it on your roof and point it in the direction of the tower and your speeds will increase tremendusly
is ther 4th axis toolpath milling in freecad
Does it start measuring amperage only from 60 amps onwards? Or it measures from 0.01 amps. Because in his description it shows... AC Current (A) 60A/600A Thanks..
Thanks mate. By the way folks, STEP import seems to produce a solid naturally in FreeCAD, skipping the messy mesh portion. So if you have the option to use STEP instead of STL you're probably gonna have a better time!
That it’s a good tip, but I am glad he showed the refine shape.
Hello. The fanuc post processor os not available? Do you know if It Will be available in the future? Ciao e grazie!
Thank you.
Thanks!
This software have wire edm?
Hey, can you do some video about generating G-code that Including 4th aixs of rotation. Thx a lot!